HP 8924C Application Manual page 254

Chapter 7, Short Message Service Tests
Sending Short Messages on the Traffic Channels
4. Send the message.
Manual Operation:
1. Select Svc Opt 6 or 14.
2. Press the CALL key.
The MS Ack Rcvd will light when the MSUT has
sent an acknowledgment that it received the
message.
Selecting Service Option 6 will select Rate Set 1 (9600 bps full rate).
Selecting Service Option 14 will select Rate Set 2 (14400 bps full rate).
HP-IB Syntax
"CDMA:CALL:TRAF:DATA:MODE 'Svc Opt 6'"
"CDMA:SMS:TERM:SEND"
"STAT:CSMS:COND?"
"STAT:CSMS:EVEN?"
254
selects Service Option 6 in the Traffic Data Mode field.
selects the Send Msg Execute field, which sends the message contained in
the User Data field to the MSUT.
queries the CDMA SMS Status Condition Register. Bit 0, (BCD 1) will be
true while the SMS In Progress annunciator is lit.
queries the CDMA SMS Status Event Register. Bit 1, (BCD 2) will be true
after the MS Ack Rcvd light is lit.
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\CHAPTERS\amsms.fb
sms5.pcx+newfield.pcx