HP 8924C Application Manual page 62

Chapter 2, Setting Up a Call
Setting up a Call
HP-IB Help:
HP-IB Syntax:
DISP CCNT;CDMA:MOB:REG !causes the mobile station to register.
HP BASIC Example
1 RE-SAVE "C:\HPBASIC\REG"
10 OUTPUT 714;"CDMA:MOB:DAT '*Clr All*'" !Clears MS Database values
20 OUTPUT 714;"CDMA:MOB:REG"!Begins the zone-based registration process
30 T=TIMEDATE
40 REPEAT
50 OUTPUT 714;"stat:cdma:even?" !Queries CDMA Status Event Register
60 ENTER 714;Reg
70 IF TIMEDATE-T>=25 THEN
80 PRINT "ERROR"
90 STOP
100 ELSE
110 WAIT .1 !Prevents HP-IB commands from dominating Test Set processes
120 END IF
130 UNTIL BIT(Reg,11)
140 END
62
The Call Status Registering annunciator is assigned to bit 11 in the CDMA Status
Register Group. The following program example polls the CDMA Status Event
Register until bit 11, Mobile Station Registered, goes true.
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amcall.fb