Table of Contents
Advertisement
Installation Guide Linear Motors
Ordering information
Item
Description
LU06-250
Klüberfood NH1 4-002 Spray* (250 ml)
LU02-08
Lubricant for linear motors **
LU02-50
Lubricant for linear motors **
LU02-1000
Lubricant for linear motors **
* LinMot Spray LU06 corresponds to KLÜBERFOOD NH1 4-002 which was developed for the food
processing industry.
** LinMot LU02 Lubricant corresponds to KLÜBERSYNTH UH1 14-31 which was developed for the food
processing industry.
7 Storage, transport, installation altitude
•
Sliders are to be stored and transported only in the plastic containers (with cardboard inlay) provided for
this purpose, or already installed and secured in LinMot P stators.
•
Remove the slider from this plastic containers only for assembling.
•
The storage area must be dry, dust-free, frost-free and vibration-free.
•
The relative air humidity should be less than 60 %.
•
Prescribed storage temperature: -15 °C...70 °C
•
The motor must be protected against extreme weather conditions.
•
The air in the storage area must not contain any harmful gases.
•
The max. installation altitude is 2'000 m (for higher values contact LinMot) above sea level.
•
From 1'000 m, derating of 1 °C per 100 m is to be considered for air cooling.
8 Dimensions
8.1 Stator
8.1.1 PS10-54x120
8.1.2 PS10-54x180
NTI AG / LinMot
(8 g)
(50 g)
(1000 g)
P10-54 / P10-54-D24/25/25S
ENG
Item-No.
0150-2394
0150-1953
0150-1954
0150-1955
Page 27 / 32
Advertisement
Table of Contents
