Download  Print this page

Advertisement

Multi Channel AV Receiver
STR-DN1020
Start here
Hello, this is your Quick Setup Guide

Advertisement

Table of Contents

   Related Manuals for Sony STR-DN1020

   Summary of Contents for Sony STR-DN1020

  • Page 1 Multi Channel AV Receiver STR-DN1020 Start here Hello, this is your Quick Setup Guide...
  • Page 2 Setting up the speakers Connecting your TV and other devices Other connections Selecting speakers and optimizing Playback...
  • Page 3 Here’s what’s in the box You will need to have a speaker system in place and/or other equipment ready to connect. Multi Channel AV Receiver (1) Optimizer microphone (ECM-AC2) (1) Remote control (RM-AAP064) (1) AM loop antenna (aerial) (1) R6 (size-AA) batteries (2) FM wire antenna (aerial) (1)
  • Page 4 First, position your existing speakers around the room using the illustration below as a reference. FRONT L SUBWOOFER ē You can connect two FRONT HIGH ē speakers instead of two SUR BACK speakers if you prefer. ē Up to two subwoofers can be connected. ē...
  • Page 5 Progress Next, connect your speakers to the AV receiver. Match the labels for each terminal to the position of each speaker. Do not forget to connect the subwoofer cable(s) as well. 10 mm   Subwoofer...
  • Page 6 Continue by connecting your TV. To enjoy high-quality video and audio, the best method is to connect via a High Speed HDMI cable (not supplied). Digital (better quality) Analog (good quality) Blu-ray Disc player, PlayStation®3, or satellite tuner To connect your Blu-ray Disc player, PlayStation®3, or satellite tuner, simply connect with a High Speed HDMI cable.
  • Page 7 If your TV has an HDMI ARC If your TV has no HDMI ARC jack, jack, you do not need an optical you need an optical digital cord digital cord. (not supplied) to enjoy TV sound through the system speakers. HDMI cable Optical digital cord Digital (better quality)
  • Page 8 For FM radio, connect the supplied FM wire antenna (aerial) into the FM ANTENNA jack and extend it for the best reception.   LAN cable (not supplied) FM wire antenna (aerial)   Alternatively, connect your own external antenna (aerial). You can connect to the internet and home network services using a LAN cable.
  • Page 9 Now you can switch on the AV receiver, TV, subwoofer and other devices. Do not forget to put batteries in the remote. The shape of the wall outlet (mains) differs depending on the region. / Progress /...
  • Page 10 With the supplied remote, select the speaker pattern according to your speaker system. Press MENU. The menu is displayed on the TV screen. Press / repeatedly to select “Settings,” then press Press / repeatedly to select “Speaker,” then press Press / repeatedly to select “SP Pattern,” then press Press /...
  • Page 11 Next, plug the supplied Confirm active subwoofer setup. optimizer microphone into the When a subwoofer is connected, AUTO CAL MIC jack. turn it on and turn up the volume prior to activating it. Turn the Place it roughly where you would subwoofer’s LEVEL dial up about normally sit, and at ear level –...
  • Page 12 Now perform Auto Calibration. Press MENU. Press / repeatedly to select “Settings,” then press Press / repeatedly to select “Auto Cal.,” then press Press / repeatedly to select “Standard,” then press Press The measurement starts in five seconds. The measurement process will take approximately 30 seconds with a test tone.
  • Page 13 If an error code or warning appears on the TV screen after Auto Calibration, look it up below. After taking the appropriate steps, perform Auto Calibration again. Error Code 31 No speakers are selected. Press SPEAKERS to set the speakers. Error Code 32 None of the speakers were detected.
  • Page 14 Now you can select any other equipment or devices you may have. Select the equipment you want, then press The menu screen disappears and the playback screen of the external input appears. The available inputs are: BD/DVD ˎ ē GAME ˎ...
  • Page 15 Progress Lastly, to enjoy multi-channel surround sound, you should also set up any other devices you have connected. This will ensure that the sound signal taken from each device is in the correct format. Multi-channel digital audio Check the digital audio output setting on your connected devices.
  • Page 16 This Quick Setup Guide saves paper To save natural resources, Sony has drastically reduced paper by no longer including full printed manuals. However, full operating instructions, and more, can be found online: http://support.sony-europe.com/ 4-282-221-11(1)  2011 Sony Corporation Printed in Malaysia...

Comments to this Manuals

Symbols: 0
Latest comments: