Setting The Ssl Function - Ssl Menu; Setting Tab; Http Port Number - Sony Ipela SNCA-ZX104 User Manual

Default gateway
Type the default gateway.

HTTP port number

Normally select 80. If you want to use a port number
other than 80, select the text box and type a port number
between 1024 and 65535.
Note
When you have set the HTTP port number to a number
other than 80 in the Network menu or in SNC toolbox,
access the system again by typing the IP address of the
unit on your Web browser as follows:
Example: Setting port number 8000 when IP address is
192.168.0.100
IPv6 setting
Configure the IPv6 network settings.
IPv6 can be used simultaneously with IPv4.
Only IPv6-specific details are explained here. For
common details, see "IPv4 setting" on page 18.
On/Off
To use IPv6, select On.
Prefix
Enter the Prefix value. (0 to 128)
OK/Cancel
See "Buttons common to every menu" on page 15.
Setting the SSL function
— SSL Menu
When you click in the Setup menu, the SSL menu
SSL
appears.
Use this menu to configure the SSL or TLS function.
(called "SSL" hereafter) The settings allows the unit to
communicate with the client PC by using SSL.
Note
The model on sale in China does not support the SSL
function.

Setting tab

SSL function
On: Select this to use the SSL function. When Allow
HTTP connection for some clients is selected, both
HTTP and SSL connections are allowed. When
Allow HTTP connection for some clients is not
selected, only SSL connection is allowed.
When Microsoft Internet Explorer Ver.6.0 is used
When SSL session is established,
status bar on your web browser.
When Microsoft Internet Explorer Ver.7.0 or
Internet Explorer Ver.8 is used
When SSL session is established,
of the address bar on your web browser.
Off: Select this to not use the SSL function. Only HTTP
connection is allowed with the unit.
When you use SSL connection for the first time
When you use SSL connection only with the SSL
function On, you cannot access the unit if the SSL
function does not work properly.
In this case, you must reset the unit to the factory
settings. (All settings will be initialized.)
Setting the SSL function — SSL Menu
appears in the
appears in the right
19