Table of Contents
Advertisement
Menu Settings
You can obtain information and perform various settings
using menus on the LCD.
Some of the menu items have submenus. The menu
settings are maintained even if you turn the unit off.
Menu Items
RF Center Freq.: To set the center receiving frequency
(default: 2442 MHz). It can be selected in the range of
2406 to 2478 MHz in 1-MHz or 12-MHz steps. Set it
according to the transmitting frequency of the WLL-
CA50 used in combination.
Viterbi Bit Error: The bit error rate of the receiving
signal is displayed. No setting is made with this item.
LCD Backlight: Turn the backlight of the LCD ON/OFF
(default: ON).
Descramble: To set the 3-digit descramble code (default:
AAA).
The left two digits can be capital letters, the right one
digit can be a capital letter or a number (0 to 9). Set
the same as the Scramble code of the WLL-CA50
transmitter to be used in combination.
Stream Sel: To set the operating mode of the stream
selector (default: Auto).
Set it to Auto to automatically select an input of the
best condition for output. When you want to select a
certain input reqardless of the condition, select Int
(internal), ext1 (external stream input 1), or ext2
(external stream input 2).
Setting the Menu Items
1
Press the MENU key.
The unit enters Menu Item Selection mode, and two
items of the Main Menu are displayed on the LCD.
> RF Center Freq.
Viterbi Bit Error
2
Press a cursor key to move the cursor (>) to the item
to be set.
Pressing the down-arrow cursor key moves the cursor
downwards, and pressing the up-arrow cursor key
moves it upward, scrolling the display.
Example:
RF Center Freq.
f
F
> Viterbi Bit Error
LCD Back Light
Descramble
Stream Sel
3
Press the ENTER key.
The unit enters Setting mode of the selected menu
item.
4
When the selected menu item includes multiple
setting items or digits, press the right- or left-arrow
cursor key to select the items or digits to be set.
The selected item (digit) flashes.
Example:
> RF Center Freq.
Ch 2
2418MHz
G
g
5
Press the down-arrow or up-arrow cursor key to
display the desired value.
Each time you press the key, the value changes in
sequence.
Example:
> RF Center Freq.
Ch 2
2418MHz
f
F
> RF Center Freq.
Ch 1
2406MHz
f
F
Page 13
Menu Settings
Advertisement
Table of Contents
