Blu-Ray Disc Player - Sony STR-DH800 Operating Instructions Manual

Connecting a Blu-ray disc player
The following illustration shows how to
connect a Blu-ray disc player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• The initial setting of the COMPONENT VIDEO
IN 1 jacks are Blu-ray disc player. If you want to
connect your Blu-ray disc player to the
COMPONENT VIDEO IN 2 or IN 3 jacks, set
"V. ASSIGN" in the VIDEO menu (page 57).
EZW-T100
MONITOR
IN 3 IN 2 IN 1
OUT
Y
/
P
B
C
B
P /
R
C
R
COMPONENT VIDEO
ASSIGNABLE (INPUT ONLY)
OUT IN
L
R
SA-CD/CD/CD-R TV
A Component video cord (not supplied)
B Video cord (not supplied)
C Optical digital cord (not supplied)
D Coaxial digital cord (not supplied)
E Audio cord (not supplied)
* When you connect a component equipped with a
COAXIAL jack, set "A. ASSIGN" in the AUDIO
menu (page 57).
28 US

Blu-ray disc player

Video signals
A
ANTENNA
SIRIUS
DMPORT
DC5V
0.7A MAX
OPTICAL
VIDEO VIDEO VIDEO VIDEO VIDEO
OUT
IN IN OUT IN
MONITOR
AUDIO AUDIO AUDIO AUDIO
IN IN IN OUT IN
AUDIO
OUT
SAT BD VIDEO 1
SUBWOOFER
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• To input multi channel digital audio from the Blu-
ray disc player, set the digital audio output setting
on the Blu-ray disc player. Refer to the operating
instructions supplied with the Blu-ray disc player.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Audio signals
B C
AM IN 4 IN 3
ASSIGNABLE (INPUT ONLY)
TV DIGITAL
(ASSIGNABLE)
DVD
SAT BD
IN
IN
IN IN
OPTICAL COAXIAL
CENTER
SURROUND BACK/
BI-AMP/
FRONT B
R L
SPEAKERS
D E
HDMI
IN 2 IN 1 OUT
SURROUND
R L
FRONT A
R L