Figure 1-11 Changing The N432A Lan Interface Configuration - Keysight Technologies N432A User Manual

1 Introduction
Click Submit (to accept the default password), and the page as shown in
Figure 1- 11
A LAN reset needs to be performed to ensure that the password is reset to default. The
N O T E
LAN reset procedure is as given below:
1 Press
2 Press
3 Press
When
You can change the password from the Configuring your N432A Power Meter page as
shown in
Password parameter.

Figure 1-11 Changing the N432A LAN interface configuration

24
will be displayed. The default password is "keysight".
> Remote Interfaces
to display the second page of the Remote I/F menu.
1 of 2
to reset the LAN settings to default.
LAN Reset
is pressed, it will also change the GPIB address to default.
LAN Reset
Figure 1-11. Scroll down the Parameter column until you locate the Change
to display the Remote Interfaces screen.
N432A User's Guide