Window Symbols and Pop-Ups
There are several different graphic symbols and pop- up messages that can
occur on the N432A display. These can occur for a variety of reasons,
such as:
• An error or warning occurs
• You are required to wait while the N432A carries out a procedure
• You are required to select an entry from a list
• You are required to enter a numeric value
There are three different colors used to signify the pop- up status:
• Green – used to allow data entry
• Orange – used to display information
• Red – used to display an error
Warning symbol pop-up
A warning symbol is displayed either in a pop- up message or directly in
the measurement window when such an event occurs. A pop- up message
is displayed for approximately two seconds. The text in the pop- up
message gives details of the warning type, for example, to indicate that a
sensor has insufficient bandwidth or a previously entered frequency value
in a table. Depending on the severity of the warning, the pop- up may be
displayed in orange or red.
N432A User's Guide
Introduction
1
15