Table of Contents
Advertisement
14 This displays the connected sensor, offset value, acquisition mode, and
15 The blue highlight on the right of the window indicates the currently
Figure 1-3 Full screen numeric display
Figure 1- 3
16 This field displays either a ratio or difference measurement indicator
17 This field displays either Minimum Hold or Maximum Hold if the range hold
18 This field displays Dty Cyc if a duty cycle is set.
19 This field displays Ofs if an offset is set.
20 This field displays Rel if relative mode is enabled.
N432A User's Guide
bridge resistance type for the channel.
selected measurement display line.
Using the up/down arrow key or
measurement window selection.
Using
on a numeric measurement result window allows you to
select either a single enlarged window or a full screen display. The
display style is applied to the currently selected window or
measurement line.
16
17
shows a single numeric full screen displaying a relative result.
when the Combined measurement function is enabled.
is set to minimum or maximum respectively.
, you can change the
18
19
Introduction
20
21
13
1
Advertisement
Table of Contents
