Single Function Measurement
The following figure shows a single function measurement configuration
for the upper measurement line of the upper display window.
Figure 2-22 Single function measurement configuration
Procedure
Use the following the procedure to set the single function measurement:
1 Press
2 Use the arrow keys to highlight the Combination function field.
3 Press
Figure 2-23 Function pop-up list
4 Press
5 Press
N432A User's Guide
>
Meas Select
to display the Function pop- up list, and use the up/down
arrow key to highlight Single.
to enter the selection.
to complete the setup and display the measurement
results.
Selected window/measurement
Function field
to select the required window/measurement.
Operating Information
2
57