50 Disassembly and assembly
22. Remove clamp (21) from the cylinder block
and disconnect high-pressure pipe (22). [*9]
a FSP: Fuel supply pump
a Remove the bellows from the sleeve nut
portions.
23. Remove six bellows (23).
a Cylinder head side only
24. Disconnect six high-pressure pipes (24) at the
cylinder head side. [*9]
25. Remove common rail and high-pressure pipe
assembly (25). [*10]
PC210, 230, 240-8
26. Remove protection cover (26).
27. Loosen air tube clamp (27). [*11]
28. Loosen hose clamp (28). [*12]
29. Disconnect lubrication inlet hose (29) and lubri-
cation outlet hose (30).[*13]
30. Remove all the mounting bolts for exhaust
manifold (31) except a few pieces. [*14]
UEN00660-00
19