Komatsu PC210-8 Shop Manual page 1045

50 Disassembly and assembly
2) Disassemble No. 1 carrier Assembly by
the following order.
1] Remove snap ring (5), thrust washer
(6), gear (7), bearing (8), snap ring (9)
in order.
2] Remove plate (10).
3] Reverse carrier (34) and remove
snap ring (35).
a PC210-8, PC210LC-8, PC210NLC-8, PC230-8
a PC240LC-8, PC240NLC-8
3) Using push tool [2], remove shaft (11) from
carrier (34).
Input pin press (reference):
q
11.2 – 25.8 kN {1,140 – 2,630 kg}
PC210, 230, 240-8
7. Remove No. 2 sun gear (12).
8. Remove the mounting bolt and remove ring
gear (13).
9. Remove holder mounting bolt (14).
10. No.2 carrier assembly
1) Remove No. 2 carrier assembly (15).
UEN00661-00
23