Komatsu PC210-8 Shop Manual page 1110

UEN00664-00
Demolition spec.
q
a Insert the resin shim (thickness 1.0mm) as well
as except demolition spec.
1) Ring lifting
2) As running
[*3]
2
Inner surface of bushing as assembling the
pin: Anti-friction compound (LM-P)
2
Feed grease after assembling pin:
a Adjust the clearance (c) between the foot's end
face of boom (13) and bracket (14) to 1 mm or
less by use of shims. Thickness of standard
shim: 2.0, 2.5, 3.0 and 3.5 mm
4
q
q
Grease (LM-G)
50 Disassembly and assembly
Air bleeding
Bleed the air from the circuit between the valve
and the hydraulic cylinder. For details, see
Testing and adjusting, air bleeding of various
parts.
Refilling with oil (hydraulic tank)
Refill hydraulic oil through the oil filler port to
the specified level. Let the oil circulate in the
hydraulic system by starting the engine. Then
check the oil level again.
PC210, 230,240-8