Komatsu PC210-8 Shop Manual page 1013

50 Disassembly and assembly
21. Remove fuel filter and bracket assembly (23).
a Put it on the engine.
22. Remove hose and tube assembly (24).
a Remove it without separating from the
bracket.
a MIKALOR clamp [*2]
a Mark the hose edge and tube to show the
original hose installation positions. (See
figure below.)
a If disconnecting air intake connector (C),
replace the gasket.
23. Disconnect radiator hose (25). [*3]
a Mark the hose edge and tube to show the
original hose installation positions.
24. Disconnect heater hose (26).
25. Remove fan guard (27).
PC210, 230, 240-8
26. Disconnect air cleaner tube (28). [*4]
27. Remove after cooler hose and tube assembly
(29).
a MIKALOR clamp [*5]
a Mark the hose edge and tube to show the
original hose installation positions. (See
figure below.)
28. Disconnect fuel filter hose (30) from fuel supply
pump (FSP).
a The fuel filter hose can be disconnected
by pushing locks (L) at both sides.
UEN00660-00
39