Komatsu PC210-8 Shop Manual page 1125

50 Disassembly and assembly
a You can perform this work efficiently
by pulling window glass (9) from
inside of the operator's cab with suc-
tion cup X2.
a After installing front window glass (4),
fill the clearances between it and cen-
ter trim seal (16) with caulking mate-
rial in range (s) with dimensions (t)
and (u).
After applying the primer to glass (4)
of section A-A, apply the adhesive as
caulking material.
Caulking dimension (t): 2 mm
q
Caulking dimension (u): 5 mm
q
a When caulking, mask the glass side
and form the adhesive with a rubber
spatula as shown in the figure.
a Wipe off the projected adhesive.
2
Glass primer;
Sunstar primer for glass 580
super
2
Adhesive:
SUNSTAR penguine seal 580
super "S" or "W"
PC210, 230, 240-8
UEN00665-00
13