Komatsu PC210-8 Shop Manual page 1086

UEN00663-02
33. Remove mounting bolt, and lift off control valve
assembly (47) to remove.
4
Control valve assembly: 260 kg
12
50 Disassembly and assembly
Installation
Installation is done in the reverse order of re-
q
moval.
Refilling with oil (hydraulic tank)
q
Refill hydraulic oil through the oil filler port to
the specified level. Let the oil circulate in the
hydraulic system by starting the engine. Then
check the oil level again.
5
Hydraulic tank:
3
Hydraulic tank drain plug:
58.8 – 78.5 Nm {6.0 – 8.0 kgm}
Air bleeding
q
Bleed the air from the circuit between the valve
and the hydraulic cylinder. For details, see
Testing and adjusting, air bleeding of various
parts.
Approx. 234l (PC210, 230)
Approx. 239l (PC240)
PC210, 230, 240-8