Komatsu PC210-8 Shop Manual page 1035

50 Disassembly and assembly
5. No.1 sun gear shaft
Remove No. 1 sun gear shaft (11).
6. No.1 & No.2 ring gears
Remove No.1& No.2 ring gears (12).
7. Thrust washer
Remove thrust washer (13).
8. No. 2 sun gear
Remove No. 2 sun gear (14).
9. Washer
Remove washer (15).
10. No.2 carrier assembly
1) Remove No. 2 carrier assembly (16).
PC210, 230, 240-8
2) Disassemble No. 2 carrier assembly in the
following procedure.
1] Drive pin (17) into pin (18) to remove
pin (18) from carrier (19).
a Remove pin (17) from pin (18)
after pin (18) is removed.
2] Remove thrust washer (20), No. 2
planetary gear (21), needle bearing
(22) and thrust washer (23).
11. Locked
1) Remove lock (24).
2) Use the tool J4 to remove lock (25).
UEN00661-00
13