Komatsu PC210-8 Shop Manual page 1116

UEN00665-00
31. Detach harness clamp (41) from the right back
side of cab.
32. Remove bolt (42) under the cab and remove
lock plate (43). [*1]
33. Remove bolt (44). [*2]
34. Dismount 6 mounting bolts (45) and mounting
nuts (46).
a Check the bolt length beforehand.
4
50 Disassembly and assembly
35. Lift off and remove operator's cab assembly
(47).
4
Operator's cab assembly: 470 kg
Installation
Installation is done in the reverse order of
q
removal.
[*1]
3
Mounting bolt of lock plate (43):
98 – 123 Nm {10 – 12.5 kgm}
[*2]
3
Bolt (44):
245 – 309 Nm {25 – 31.5 kgm}
PC210, 230, 240-8