Komatsu PC210-8 Shop Manual page 1017

50 Disassembly and assembly
58. Disconnect hydraulic tank hoses (71) and (72).
a To be not obstructive in removing the
engine.
59. Remove fan belt (75) from the alternator with
wrench [1].
60. Disconnect connectors AB (76) and E12 (77).
61. Remove alternator (78).
62. Disconnect heater hose (79).
63. Remove three bolts and disconnect radiator
hose and flange assembly (80). [*8]
PC210, 230, 240-8
64. Disconnect engine ground (81).
65. Remove four engine mounting bolts (82).[*9]
a The nut is not welded except at the engine
ground point. Due to that reason firstly fix
nut locking tool (plate) A8 with bolt (B) to
strict nut (N) turn, then remove engine
mounting bolt (82).
UEN00660-00
43