Komatsu PC210-8 Shop Manual page 1027

50 Disassembly and assembly
6. Remove No. 1 sun gear shaft (11).
7. Remove thrust washer (12).
8. Remove No. 2 sun gear (13).
9. No.2 carrier assembly
1) Remove No. 2 carrier assembly (14).
4
No. 2 carrier assembly: 35 kg
2) Remove thrust washer (15).
3) Disassemble No. 2 carrier assembly as
follows.
1] Insert pin (16) and drive shaft (17) out
of carrier (18).
a After removing the shaft, remove
pin (16).
2] Remove thrust washer (19), gear
(20), bearing (21), and thrust washer
(22).
PC210, 230, 240-8
10. Nut
1) Remove lock plate (23).
2) Use the tool J1 to remove nut (24).
a Use bar [2] to hold.
UEN00661-00
5