50 Disassembly and assembly
10. Remove duct (14).
11. Remove cover (15).
a Disconnect connector H15 fixed on the
back from the clip.
12. Remove plate (16).
13. Remove plate (17).
14. Remove lock pin (18) and remove duct (19).
15. Remove ducts (20) and (21).
a Cut tie-wrap.
PC210, 230, 240-8
16. Remove ducts (22) and (23).
a Cut tie-wrap.
17. Remove duct (24) upper and lower.
18. Remove duct (25) upper and lower.
19. Disconnect plate (26) from the cab wall.
20. Disconnect connectors N10 (27) and AC01
(28).
21. Disconnect connectors ECU10 and ECU11
( 2 9 ) f r o m t h e a ir c o n d i t i o n e r c o n t r o l l e r
(ACCONT).
22. Loosen tie-wrap (30) and draw in wiring har-
ness (31).
UEN00666-01
3