Pin Settings; Figure 49 - Sim - Pin Settings; Table 18 - Usb Mobile Pin Configuration Page - NetComm NL1901ACV User Manual

PIN settings

When gateway status DISCONNECT is displayed, click the PIN button in the Manage column to open the PIN
settings page:
The following fields are found on this page.
F I E L D
SIM card's Status
PIN's Status
PIN Retries remaining
PIN protection
Change PIN button
Current PIN
Confirm Current PIN
Remember PIN
Submit button
Cancel button
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 48 – SIM – PIN settings
Current status of the SIM card.
Current status of the SIM card's PIN.
Enter the number of tries allowed before the system PUK locks
the SIM card.
The default is three (3) attempts.
When  Enable is selected, the current PIN must be entered.
When  Disable is selected, PIN entry not required.
When PIN protection is  Enable click Change PIN to change the
PIN to something easier to remember or more secure.
Shows the new or current PIN.
Re-enter the Current PIN.
Select to allow your browser to retain the PIN in its memory.
Click to save and apply the changes.
Click to close without saving and return to the broadband setup
page.
Table 18 – USB mobile PIN Configuration page
D E S C R I P T I O N
50 of 146
© NetComm Wireless 2018