Wan Service; Figure 40 - Nl1901Acv Gateway; Figure 41 - Wan Service - Select Layer 2 Interface - NetComm NL1901ACV User Manual

WAN Service

The WAN Service page displays the current Wide Area Network service setup and allows you to configure the
gateway to connect to a larger network for Internet access.
Attention – WAN service requires a preconfigured Layer 2 interface, be it ATM/PTM or Ethernet WAN.
To add a WAN service, click the Add button.
Use the drop down list to select the layer 2 interface to use for the WAN service and click the Next button.
Select a WAN service type, enter a Service Description, enter the 802.1P Priority and 802.1Q VLAN ID if required,
then click the Next button.
To disable VLAN tagging, place input value of -1. Refer to your ISP for VLAN information as required by your
Internet Service Provider.
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 39 – NL1901ACV gateway
Figure 40 – WAN Service – Select layer 2 interface
44 of 146
© NetComm Wireless 2018