Table of Contents
Advertisement
605 to RJ-11 adapter
The 605 to RJ-11 adaptor is provided to comply with the older 610
Telstra wall socket. The 605 to RJ-11 adapter may be used to
convert the supplied RJ-11 cable, if the older connection is
required.
USB cable
A typical USB cord has an "A" connection ("upstream" to plug into the computer) and a "B"
connection ("downstream" to plug into the device).
"A" Connection
By using different connectors on the upstream and downstream ends, cable connection is
simplified. The "B" connection will fit a into the "B" socket of any USB device. Similarly,
any "A" connector can be plugged into any "A" socket, such as on a computer.
If it is a new device, the operating system auto-detects it and asks for the driver disk. If the
device has already been installed, the computer activates it and starts talking to it. USB
devices can be connected and disconnected at any time.
9 Pin (RS-232 ) Serial Cable
A 9 Pin (RS-232) Serial Cable may be used to connect a device to a serial console terminal
or a PC running a terminal emulation program, such as Hyper Terminal.
Male Connector
Rev. 1 - YML698
HS800 User's Guide
Pin No
Name
1
DCD
2
RD
3
TD
4
DTR
5
SGND
6
DSR
7
RTS
8
CTS
9
RI
"B" Connection
Notes/Description No.
Data Carrier Detect
Receive Data (a.k.a RxD, Rx)
Transmit Data (a.k.a TxD, Tx)
Data Terminal Ready
Ground
Data Set Ready
Request To Send
Clear To Send
Ring Indicator
www.netcomm.com.au
Page 59
Advertisement
Table of Contents
