Policy Routing - NetComm NL1901ACV User Manual

To add a static route rule click the Add button. The following screen is displayed.
Select the IP Version, enter the Destination Network Address, select an Interface, and enter the Gateway IP
Address.
Optionally enter a number in the Metric field to set a priority for this route, the lower the number the higher the
priority.
Then click Apply/Save to add the entry to the routing table.

Policy Routing

This function allows you to add policy rules to certain situations.
Click the Add button to add a policy rule. The following screen is displayed.
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 79 – Routing – Static Route configuration
Figure 80 – Routing – Policy Routing list
Figure 81 – Advanced – Routing – Policy Route configuration
70 of 146
© NetComm Wireless 2018