Dsl; Table 31 - Dsl Settings Table - NetComm NL1901ACV User Manual

DSL

This page allows you to modify the DSL modulation settings on the unit. By changing the settings, you can specify
which DSL modulation that the gateway will use.
Not all modulation types are support by your local DSLAM equipment, check with your ISP for supported
modulation types.
F I E L D
Modulation
Profile
USO
Phone line type
Capability
Apply/Save button
Advanced Settings button
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 86 – DSL settings page
A user defined name for the policy route.
The LAN port to be used for the policy.
The IP address of the LAN device involved with the policy.
Select the Interface that the policy will employ.
Enter the gateway address.
Click the Apply/Save button to initiate the change.
Allow configuration of the Gateway state for diagnostic
purposes.
Table 31 – DSL settings table
D E S C R I P T I O N
74 of 146
© NetComm Wireless 2018