NAT
Virtual Servers
Virtual Servers (also commonly referred to as port forwarding) allow you to direct incoming traffic from the WAN
side to the Internal network host with a private IP address on the LAN side.
Click the Add button to add a virtual server.
F I E L D
Select a Service or
Custom Service
Enable LAN
Loopback
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 53 – NAT -- Virtual Server list
Figure 54 – NAT -- Virtual Server Configuration page
Select a pre-configured port forwarding rule or choose custom server
to create your own port forwarding rule.
Select Enable LAN Loopback to make the virtual server available on
the LAN side. In this way the user on the LAN side can access service
D E S C R I P T I O N
55 of 146
© NetComm Wireless 2018