Figure 7 - Select Pppoe As Wan Mode; Figure 8 - Enter Pppoe User Id And Password - NetComm NL1901ACV User Manual

b Select either the PPPoE, PPPoA or Bridging for your internet connection as specified by your Internet
Service Provider (ISP).
c Click the Next button.
d In the User ID and Password fields, enter the PPPoE or PPPoA authentication username and password
assigned to you by your Internet Service Provider (ISP). Bridging does not require a username or
password.
e If you plan to use a SIM card for fallback protection via a mobile network connection, select  Enable
Mobile Broadband Backup and enter the Network Name (APN) and the Username and Password, if
required. For more information on setting up fallback protection and unlocking the SIM, refer to the
Mobile Network section on page 30.
f Click the Finish button.
g The account settings are saved and the NL1901ACV connects to the internet.
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 7 – Select PPPoE as WAN mode
Figure 8 – Enter PPPoE User ID and Password
24 of 146
© NetComm Wireless 2018