Figure 19 - Ip Over Ethernet (Ipoe) -- Vlan Setup; Figure 20 - Ip Over Ethernet (Ipoe) - Static Or Auto Ip Address - NetComm NL1901ACV User Manual

IP over Ethernet (IPoE)
If at step c you selected IP over Ethernet (IPoE):
i Select the correct VLAN option for your connection. For New Zealand customers, the
requirement for VDSL is VLAN tag 10. If you are not sure of the tagging requirement for your
connection, please contact your ISP. Click the Next button.
ii If your ISP has supplied a static IP address, select Use the following Static IP address and enter
the details, otherwise select Obtain an IP address automatically.
iii If you want to set up the optional Mobile Broadband fallback facility, select  Enable Mobile
Broadband Backup and enter the following mobile network's details: Network Name (APN) and
the Username and Password, if required. For more information on setting up fallback protection
and unlocking the SIM, refer to the Mobile Network section on page 30.
iv Click the Next button to display details of the settings in a Summary page.
v Click Apply/Save to activate the NL1901ACV's connection to the internet.
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 19 – IP over Ethernet (IPoE) -- VLAN Setup
Figure 20 – IP over Ethernet (IPoE) – Static or Auto IP Address
29 of 146
© NetComm Wireless 2018