Bridging; Mobile Broadband; Figure 46 - Wan Setup - Bridging; Figure 47 - Nl1901Acv Mobile Broadband Setup - NetComm NL1901ACV User Manual

Bridging

When you select  Bridging mode, a summary of the settings is displayed.
Click Apply/Save to commit the settings.

Mobile Broadband

The Mobile Broadband page displays the current Wide Area Network service setup and allows you to configure
the gateway to connect to a mobile (cellular) network for primary Internet access.
Only one Mobile Broadband can be set up at a time. You can alter the setup by clicking the Edit button, or
Remove the setup and Add a new service.
F I E L D
Gateway status
indicator
Interface
Description
Type
Vlan802.1p
VlanMuxId
NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide
UG01063 v. 1.0 December 2018
Figure 45 – WAN Setup - Bridging
Figure 46 – NL1901ACV Mobile Broadband setup
In the top left corner above the start of the table is the Gateway
status indicator: dialling..., CONNECTED, Manual Dialled,
undialing..., DISCONNECT, SIM CARD INVALID OR NOT SIM
CARD!, etc.
The interface of the mobile connection.
The description of the mobile connection.
The type of WAN connection.
N/A for mobile interface.
N/A for mobile interface.
D E S C R I P T I O N
47 of 146
© NetComm Wireless 2018