Static Ip Settings; Pppoe Settings; Bigpone Cable Settings; Qos Settings - NetComm V431 Quick Start Manual

4.1.2 Static IP Settings

Select "Static IP" and enter the IP address, Subnet Mask and Default Gateway values.
Then click the "Accept" button at the bottom of the screen.
Save the settings, and then restart the system. Wait for about 40 seconds for the
system to restart.

4.1.3 PPPoE Settings

Enter the Account Number, Password and re-enter Password to confirm. Then click the
"Accept" button at the bottom.
Save the settings, and then restart the system. The system will take about 40 seconds
to restart.

4.1.4 Bigpone Cable Settings

Click "BigPond Cable". Enter User Name and Password and then click the "Accept"
button at the bottom.

4.2 QoS Settings

QoS (Quality of Service): Sets true bandwidth of your Internet connection to ensure
sound quality during transmission.
ToS/DiffServ (Type of Service/DSCP): The voice packet has the highest priority to
ensure telecommunication quality; the larger the value you set, the higher priority you
will get.
Your Broadband VoIP Phone Service
My Net Fone Ltd.
A.B.N. 37 118 699 853
6