Xilinx Spartan-3A User Manual page 105

R
11. Select Bypass when prompted for the Platform Flash PROM programming file, as
12. As shown in
Spartan-3A/3AN Starter Kit Board User Guide
UG334 (v1.0) May 28, 2007
Creating and Programming Configuration Images for SPI Serial Flash
shown in Figure 12-16.
Figure 12-16: Bypass the Platform Flash PROM
Figure 12-17, the iMPACT software then displays the JTAG chain for the
XC3S700A Spartan-3A FPGA followed by the XCF04S Platform Flash PROM. A
similar display will be seen for the XC3S700AN Spartan-3AN FPGA. Click to highlight
the FLASH memory attached to the XC3S700A FPGA. This action enables the
command options shown in Step 13.
13
Figure 12-17: iMPACT Presents JTAG Chain, Shows Attached Flash PROM
www.xilinx.com
11
UG332_c4_28_032907
12
18
UG332_c4_25_032907
105