Table of Contents
Advertisement
Step 11: Attach Gusset to Fort
A: Make sure the assembly is square before proceeding.
B: From the inside of the assembly, attach (0312) Gusset flush to the outside edge of (1500) Post on the Swing
Wall using 2 (S4) #8 x 3" Wood Screws. The other end of the gusset should be tight against (1764) Floor Front.
(fig. 11.1 and 11.2)
C: Attach the other end of (0312) Gusset to (1764) Floor Front with 1 (S4) #8 x 3" Wood Screw and 1 (S3) #8 x
2-1/2" Wood Screw, as shown in fig. 11.1 and 11.2.
Fig. 11.2
S4
Flush
1500
Wood Parts
1x
Gusset 2 x 3 x 16"
0312
1764
S3
S4
0312
1 x
3 x
Fig. 11.1
Swing Wall
Hardware
#8 x 2-1/2" Wood Screw
S3
#8 x 3" Wood Screw
S4
27
europecustomerservice@kidkraft.com
Advertisement
Table of Contents
