Table of Contents
Advertisement
Step 7: Fort Frame Assembly
A: On the front of the assembly side without the (0369) Lower Diagonal, attach (1764) Floor Front to both (1500)
Posts, noticing the bolt holes are towards the bottom of the board, with 2 (H6) 1/4 x 4-3/4" Hex Bolts (with lock
washer, flat washer and t-nut). (fig. 7.1 and 7.2)
B: On the back side of the assembly attach (1913) Back Floor to both (1500) Posts, noticing the middle bolt hole
is oriented towards the bottom, with 2 (H4) 1/4 x 4" Hex Bolts (with lock washer, flat washer and t-nut) in the
bottom holes. (fig. 7.1 and 7.2)
C: Make sure (1913) Back Floor is level and square to the posts, then attach with 2 (S7) #12 x 2" Pan Screws
(with 3/16" flat washer). (fig. 7.1 and 7.2)
Fig. 7.2
1500
H6
1764
Wood Parts
1 x
Floor Front 2 x 3 x 38-1/2"
1764
1 x
Back Floor 1 x 6 x 38-3/4"
1913
1/4"
1913
T-Nut
1/4" Flat
Washer
Hardware
2 x
H6
2 x
H4
2 x
S7
Fig. 7.1
H6
1764
S7
1500
3/16" Flat
Washer
S7
1/4" Lock
Washer
1/4 x 4-3/4" Hex Bolts (1/4" lock washer, 1/4" flat washer and 1/4" t-nut)
1/4 x 4" Hex Bolts (1/4" lock washer, 1/4" flat washer and 1/4" t-nut)
#12 x 2" Pan Screws (3/16" flat washer)
21
1913
H4
H4
europecustomerservice@kidkraft.com
S7
0369
Advertisement
Table of Contents
