This feature allows the Supervisor set up and define which
external unit (e.g. SCALE or SCANNER) is connected to a port.
When selecting "SERIAL PORT SETUP", the following is
displayed:
- Select a port (Port 1 for example) using keys
- Select a external unit using keys
- Confirm with
- Repeat the operations with the other port.
- Press
4.4 Display setup
See the paragrah "Configuration of the main screen display" in
this section.
4149884V/A
15/10/2010
4.3.6 Serial port setup
This function should only be used at the technical
departments request.
SERIAL PORT SETUP
PORT 1
PORT 2
ESCAPE
MODIFY
: a list of the possible external units is displayed.
MODIFY
.
OK
.
OK
This mode is accessible in User and Supervisor mode.
PC
WP
.
Supervisor Mode
ORIG0473-69
SUP
OK
and press
69