Using Departments - Neopost IJ70 Manual

6.
An expenditure value and a number of cycles may be assigned to
a department selected from a list, as described below.
- Press on key
- Select a department, using the arrows or by keying in directly the
- Validate your selection by pressing key
- If the department is protected by a code, enter the code to allow
4149884V/A
15/10/2010

USING DEPARTMENTS

- In order to use departments, the supervisor must have
selected first the department mode (see paragraph
"Defining departments" in section B).
- The machine is supplied with DEPT OFF. In order to use
departments, select DEPT ON in supervisor mode.
DEPT
DEPARTMENTS
SUP
DEPT MODE
ON
HOME MODIFY
department number via the numeric pad.
access to the department (a PIN can be up to 4 digits).
- Departments sharing the same access code make up a
group.
When you have entered the access code once, you will
not be prompted to enter the access code again within
the same group.
- The last department selected will be proposed by default
when operation is resumed after a standby period or
after the machine power-up.
44

Using departments

:
1 MARKETING OPEN
1 DEPT001
2 DIRECTION
3 DESIGN
4 RESEARCH
5 D005
6 D12
OK
ORIG0473-44
SETUP
.