2.
2.1 Storing in user memory "0"
After selections have been made (postage value, advertisement
slogan, mail class die, moistening, shift, etc.) it is possible to take a
"software snapshot" of the machine status. To do so, press key
twice. The whole configuration is automatically stored into memory
" 0 " (this operation overwrites the previous content in memory 0).
2.2 Recalling memories
To recall a memory, simply press key
memories is displayed:
Then key in the memory number, using numeric keys from
4149884V/A
15/10/2010
JOB MEMORY SAVING
This operation may be very useful when a job in progress has
to be interrupted (e.g.: a few items of another type need to be
processed as a priority, a phone call, etc.). You can restore the
machine to the previous status by recalling memory "0".
JOB MEMORIES
HOME
STORE
Memories 1 to 9 are preprogrammed by the supervisor -
see "Programming memories 1 to 9".
Remember that when a new scale rate is loaded into the
machine, any rate detail stored in the memory is NOT
automatically updated - recheck the memory details after
a scale rate change.
54
Job memory saving
; the list of active
M
0 USER JOB MEMORY
0 USER JOB MEMORY
1 MARKETING
2 MODEM INFORMATION
3 DESIGN
ORIG0473-54
M
OK
to
.
0
9