Timeout - Neopost IJ70 Manual

After selecting "TIME OUT" in the main supervisor menu, the
below screen is displayed:
The next delays are determined by the supervisor (between 0 and
3600 seconds, with increments of 1 second) and are expressed
in seconds:
- START: waiting time for the first document with the transport
- STOP: time-out before the machine stops after the last document
- STANDBY: time-out before the printhead returns to the protection
- SLEEP: time-out before the machine goes into sleep mode
4149884V/A
15/10/2010

4.3.3 Timeout

TIMEOUT (SEC.)
START(10 - 9999)
STOP(1 - 9999)
STANDBY(1 - 9999)
SLEEP(30 - 9999)
ESCAPE MODIFY
motor in operation (this is not settable with an autofeed attached).
processing.
position, after the motor stops (advised value: 150s).
after the printhead returns to the protection position (advised
value: 120s).
To modify the "SLEEP" time, select "SLEEP" using key
; enter the desired time (in seconds) using the
numeric keys. Confirm with
In inserter mode ON, the timeouts are disregarded, the
machine runs constantly.
0015
0005
0120
0240
.
OK
Supervisor Mode
ORIG0473-67
SUP
OK
67