Appendix; Usage Precautions - Sony VENICE MPC-3610 Operating Instructions Manual

000 93

7. Appendix

Usage Precautions

Read this section in conjunction with the
information provided in the supplied "Before Using
This Unit" document.
Use and Storage
Do not subject the unit to severe shock
The internal mechanism may be damaged or the
body warped.
Do not cover the unit while operating
Putting a cloth, for example, over the unit can
cause excessive internal heat build-up.
After use
Always set the power switch to OFF.
Before storing the unit for a long period
Remove the battery pack.
Do not leave the unit with the lens facing the sun
Direct sunlight can enter through the lens, be
focused in the unit, and cause fire.
Shipping
ˎ Remove the memory cards before transporting ˎ
the unit.
ˎ If sending the unit by truck, ship, air or other ˎ
transportation service, pack it in the shipping
carton of the unit.
Care of the Unit
If the body of the unit is dirty, clean it with a soft,
dry cloth. In extreme cases, use a cloth moistened
in a little neutral detergent, then wipe dry.
Do not use organic solvents, such as alcohol or
thinners, as these may cause discoloration or other
damage to the finish of the unit.
Refrain from cleaning with high air pressure
equipment, such as an air duster, as these may
damage optical components.
In the event of operating problems
If you should experience problems with the unit,
contact your Sony dealer.
Periodic Replacement of Fan and
Battery
The fan and battery are consumable parts that will
need periodic replacement.
When operating at room temperature, a
normal replacement cycle will be about 5 years.
However, this replacement cycle represents only
a general guideline and does not imply that the
life expectancy of these parts is guaranteed. For
details on parts replacement, contact your dealer.
Life Expectancy of the Electrolytic
Capacitor
The life expectancy of the electrolytic capacitor
is about 5 years under normal operating
temperatures and normal usage (8 hours per day;
25 days per month).
If usage exceeds the above normal usage
frequency, the life expectancy may be reduced
correspondingly.
Note about the Battery Terminal
The battery terminal of this unit (the connector for
battery packs and AC adaptors) is a consumable
part.
Power may not be supplied to the unit properly
if the pins of the battery terminal are bent or
deformed by shock or vibrations, or if they become
corroded due to prolonged outdoor use.
Periodic inspections are recommended to keep
the unit working properly and to prolong its
usable lifetime. Contact a Sony service or sales
representative for more information about
inspections.
Use and Storage Locations
Store in a level, ventilated place.
Avoid using or storing the unit in the following
places.
ˎ In excessive heat or cold (operating temperature ˎ
range: 0 °C to 40 °C (32 °F to 104 °F))
Remember that in summer in warm climates
the temperature inside a car with the windows
closed can easily exceed 50 °C (122 °F).
ˎ In damp or dusty locations ˎ
ˎ Locations where the unit may be exposed to ˎ
rain
ˎ Locations subject to violent vibration ˎ
ˎ Near strong magnetic fields ˎ
ˎ Close to radio or TV transmitters producing ˎ
strong electromagnetic fields.
ˎ In direct sunlight or close to heaters for ˎ
extended periods
To prevent electromagnetic interference from
portable communications devices
The use of portable telephones and other
communications devices near this unit can result
in malfunctions and interference with audio and
video signals.
It is recommended that the portable
communications devices near this unit be
powered off.
Note on laser beams
Laser beams may damage the CMOS image
sensor. If you shoot a scene that includes a laser
beam, be careful not to let the laser beam be
directed into the lens of the unit. Specifically, high-
power laser beams from medical devices or other
devices may cause damage due to reflected light
and scattered light.
About the Screens
ˎ Do not leave the screens facing direct sunlight, ˎ
as this may damage the screens.
ˎ Do not press/swipe the screens forcefully, or ˎ
leave objects on the screens, as it may cause a
malfunction, such as picture irregularity, etc.
ˎ The screens may become warm in use. This is ˎ
not a malfunction.
LCD Panels
The LCD panel fitted to this unit is manufactured
with high precision technology, giving a
functioning pixel ratio of at least 99.99%. Thus a
very small proportion of pixels may be "stuck",
either always off (black), always on (red, green, or
blue), or flashing. In addition, over a long period