Sony VENICE MPC-3610 Operating Instructions Manual page 42

000 42
3. Camera Operations: User Functions Screen
Functions that can be Assigned to Viewfinder (DVF-EL200) Assignable Buttons A
to C
Assignable Button setting Function
No Assign No assignment
Color Bars Turns color bars on/off.
1)
AXS Slot Change Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
SxS Slot Change Switches the active slot when two SxS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
Rec Review Executes the Rec Review function.
VF Frame Line Turns superimposition of frame lines on the
viewfinder/monitor screen output image on/
off.
VF Zebra Turns the zebra function of the viewfinder/
monitor screen output image on/off.
VF Status Info Turns the information display on the
viewfinder/monitor screen output image on/
off.
VF Focus Magnifier Turns the focus magnifier function of the
viewfinder on/off.
Press & Hold for VF Log Disables the LUT applied to the viewfinder/
2)
monitor screen output image while the button
is pressed, and sets Log image quality without
applying a LUT.
VF Highlight Clip Ind Turns the function to display clipped highlight
2)
areas in red in the viewfinder on/off.
VF High/Low Key 2) Selects the viewfinder output mode.
Switches between High Key (screen for
checking for blown-out highlights)  Low
Key (screen for checking for blocked-out
shadows)  Off (normal display) each time
the button is pressed.
VF False Color 2) Turns the false color function display in a
viewfinder on/off.
Assignable Button setting
Picture Cache Rec
Iris Open (1/16 stop)
State when unit is
powered on
–
Setting retained
–
Iris Close (1/16 stop)
–
Setting not retained
Rec
Setting retained
1) Does not function if the button is pressed when an RM-B170 or other remote control unit is connected and Technical >
System Configuration > RM/RCP Paint Control (page 68) is set to On in the full menu.
Does not function if the button is pressed when Technical > System Configuration > RM/RCP Paint Control (page 68) is
2)
Setting retained
set to On in the full menu.
3) Does not function if the button is pressed when an RM-B170 or other remote control unit is connected.
Setting retained
Setting not retained
Setting not retained
Setting retained
Setting not retained
Setting retained
Function
Turns the picture cache recording function
on/off.
Opens the lens iris.
3)
Press and hold to open the iris until fully open.
This function is available when an E mount
lens with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
Closes the lens iris.
3)
Press and hold to close the iris until fully
closed.
This function is available when an E mount
lens with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
Starts/stops recording.
State when unit is
powered on
Setting retained
–
–
–