Clip Operations On The Mini Display - Sony VENICE MPC-3610 Operating Instructions Manual

000 78
3. Camera Operations

Clip Operations on the Mini Display

You can play a clip by selecting the clip to play
from the clip screen displayed on the mini display.
When AXS Rec Format is not set to Rec Off in the
Project category in the menu, AXS media becomes
playable. Similarly, when SxS Rec Format is not set
to Rec Off, SxS media becomes playable.
When both AXS and SxS media playback is
enabled, you can select the active media on the
clip list screen (page 73) of the sub display.
Clip Screen
Press the CLIPS button (page 8) on the
Operator side to display the clip screen for
playable media on the mini display.
7 1
2
6
3
5 4
1.
Playback status indicator
Displays the clip playback status.
2.
Active playback media
Displays the active playback media of the
selected clip.
3.
Clip name
Displays the clip name of the selected clip.
4.
Clip position in playback media
Displays the clip number/total number of the
selected clip.
5.
F Fwd/Next button
Jumps to the next clip when ITEM key 3 (
pressed while playback is paused.
Fast forwards the clip when ITEM key 3 (
pressed during playback.
6.
Play/Pause button
Plays/pauses clip playback when ITEM key 2
( ) is pressed.
7.
F Rev/Prev button
Jumps to the previous clip when ITEM key 1
( ) is pressed while playback is paused.
Fast reverses the clip when ITEM key 1 (
pressed during playback.
Playing
You can play recorded clips while the unit is in
standby mode.
1
Insert the SxS memory card to play.
2
Press the CLIPS button (page 8) on the
Operator side.
The active playback clip appears on the mini
display.
3
Use the Prev button (ITEM key 1) or Next
button (ITEM key 3) to select a clip to play.
4
Press the Play/Pause button (ITEM key 2).
The playback image appears on the
viewfinder/monitor screen.
) is
) is
Playback operations
Playback operation is performed using the buttons
on the mini display (page 78).
Play/Pause button: Pause playback. To resume
playback, press this button again.
F Fwd button/F Rev button: Fast forward/reverse.
) is
To return to normal playback, press the Play/Pause
button.
Monitoring audio
In normal playback mode, you can monitor the
recorded audio through the built-in speaker
(page 8) or connected headphones.
When headphones are connected to the
headphones connector (page 8), the built-in
speaker is turned off.
You can select the channel to monitor and adjust
the volume using Audio category > Monitor CH
and Monitor Level (page 46) in the menu.
Switching the SxS memory cards
When two SxS memory cards are loaded, press
the SLOT SELECT button (page 9) to switch
memory cards.
[Note]
You cannot switch SxS memory cards during playback.
Continuous playback of cards in slots A and B is not possible.