User Functions Screen - Sony VENICE MPC-3610 Operating Instructions Manual

000 39
3. Camera Operations

User Functions Screen

You can press the USER button (page 10) to
display the user functions screen on the sub
display and use the ITEM keys 1 to 5 as assignable
buttons (User 1 to 5).
There are also four assignable buttons (1 to 4)
(pages 8, 9, 10) on the unit and three
assignable buttons (A to C) on the viewfinder
(DVF-EL200) to which you can assign various
functions.
Functions can be assigned to these buttons using
the user functions screen, in addition to using
Project > Assignable Button in the full menu.
ITEM key 1 ITEM key 2
ITEM key 4 ITEM key 5
[Note]
When a lens that supports the iris setting display function is
attached, the iris position is displayed in the center left of the
user functions screen.
Changing Button Functions
The user functions selection screen is displayed by
pressing the Edit button (ITEM key 6) on the user
functions screen. You can set the functions for the
User 1 to 5 buttons, assignable buttons 1 to 4, and
viewfinder assignable buttons A to C on the user
functions selection screen.
ITEM key 3
1
On the user functions selection screen, move
the cursor to the button you want to change,
and press the Select button (ITEM key 3).
The functions that can be selected are
displayed.
ITEM key 6
2
Use the button (ITEM key 2),
(ITEM key 5), or MENU dial to change the
setting.
3
When finished, press the Set button (ITEM key
3).
The display returns to the user functions
screen, and displays the changed function.
The following tables lists the functions that are assigned when the unit is shipped from the factory.
Button Function
Assignable 1 Displays clipped highlight areas in red in the
viewfinder.
Assignable 2 No assignment
Assignable 3 No assignment
Assignable 4 No assignment
ITEM key 1 No assignment
ITEM key 2 No assignment
ITEM key 3 No assignment
ITEM key 4 Displays clipped highlight areas in red on the
Monitor output.
ITEM key 5 Sets the fan control mode.
Viewfinder assignable A Turns the focus magnifier function of the
viewfinder on/off.
Viewfinder assignable B Turns the false color function display in a
viewfinder on/off.
Viewfinder assignable C Turns the information display on the viewfinder/
monitor screen output image on/off.
Functions that can be Assigned to ITEM Keys 1 to 5
Assignable Button Function
setting
No Assign No assignment
SDI Frame Line Turns superimposition of frame lines on the SDI
3/4 output image on/off.
SDI Status Info Turns display of information on the SDI 3/4 output
image on/off.
Press & Hold for SDI Log Disables the LUT applied to the SDI 3/4 output
1)
image while the key is pressed, and sets Log
image quality without applying a LUT.
button
Monitor Frame Line Turns superimposition of frame lines on the
Monitor output image on/off.
Monitor Status Info Turns display of information on the Monitor
output image on/off.
Press & Hold for Monitor Disables the LUT applied to the Monitor output
Log image while the key is pressed, and sets Log
1)
image quality without applying a LUT.
Assignable Button setting
VF Highlight Clip Ind
Not Assigned
Not Assigned
Not Assigned
Not Assigned
Not Assigned
Not Assigned
Monitor Highlight Clip Ind
Fan Mode
VF Focus Magnifier
VF False Color
VF Status Info
State when unit is powered
on
–
Setting retained
Setting retained
Setting not retained
Setting retained
Setting retained
Setting not retained