Sony VENICE MPC-3610 Operating Instructions Manual page 40

000 40
3. Camera Operations: User Functions Screen
Assignable Button Function
setting
Monitor Highlight Clip Turns the function that displays clipped highlight
Ind 1) areas in red on the Monitor output image on/off.
Monitor False Color Turns the false color function display on a monitor
1)
on/off.
Color Bars 2) Turns color bars on/off.
AXS Slot Change Switches the active slot when two AXS memory
cards are inserted.
Switches between A and B each time the key is
pressed.
SxS Slot Change Switches the active slot when two SxS memory
cards are inserted.
Switches between A and B each time the key is
pressed.
Fan Mode Sets the fan control mode.
Switches between Auto  Max  Off in Rec/
Auto  Off in Rec/Max each time the key is
pressed.
Format Media AXS Slot A Formats media in AXS slot A.
Format Media AXS Slot B Formats media in AXS slot B.
Format Media SxS Slot A Formats media in SxS slot A.
Format Media SxS Slot B Formats media in SxS slot B.
APR Executes APR.
PL-Mt Interface Position Sets the interface position of the PL mount lens.
Switches between Top  Side  Off each time
the key is pressed.
VF Highlight Clip Ind Turns the function to display clipped highlight
1)
areas in red in the viewfinder on/off.
VF False Color Turns the false color function display in a
1)
viewfinder on/off.
Auto White Balance 2) Executes auto white balance.
Picture Cache Rec Turns the picture cache recording function on/off. Setting retained
Iris Open (1/16 stop) Opens the lens iris.
3)
Press and hold to open the iris until fully open.
This function is available when an E mount lens
with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
State when unit is powered Assignable Button
on setting
Setting retained Iris Close (1/16 stop)
Setting retained
Setting retained
Setting retained
Does not function if the key is pressed when Technical > System Configuration > RM/RCP Paint Control (page 68) is set to
1)
On in the full menu.
2) Does not function if the key is pressed when an RM-B170 or other remote control unit is connected and Technical > System
Setting retained
Configuration > RM/RCP Paint Control (page 68) is set to On in the full menu.
Does not function if the key is pressed when an RM-B170 or other remote control unit is connected.
3)
Setting retained
Functions that can be Assigned to Assignable Buttons 1 to 4
–
Assignable Button setting
–
–
No Assign
– SDI Frame Line
–
SDI Status Info
Setting retained
Press & Hold for SDI Log
Setting retained
Monitor Frame Line
Setting retained
Monitor Status Info
–
Press & Hold for Monitor Log
–
Monitor Highlight Clip Ind
Function
3) Closes the lens iris.
Press and hold to close the iris until fully closed.
This function is available when an E mount lens
with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
Function
No assignment
Turns superimposition of frame lines on the SDI
3/4 output image on/off.
Turns display of information on the SDI 3/4
output image on/off.
Disables the LUT applied to the SDI 3/4 output
1)
image while the button is pressed, and sets
Log image quality without applying a LUT.
Turns superimposition of frame lines on the
Monitor output image on/off.
Turns display of information on the Monitor
output image on/off.
Disables the LUT applied to the Monitor output
1)
image while the button is pressed, and sets
Log image quality without applying a LUT.
Turns the function that displays clipped
1)
highlight areas in red on the Monitor output
image on/off.
State when unit is powered
on
–
State when unit is
powered on
–
Setting retained
Setting retained
Setting not retained
Setting retained
Setting retained
Setting not retained
Setting retained