6. Connecting External Devices: Connecting a Remote Control Unit
Item
Sub-item
Focus
Remote
6)
Focus Position
Focus Value[%]
Focus Length[m]
Controllable when assigned to operation block of controller.
1)
Controllable only when Technical > System Configuration > RM/RCP Paint Control (page 68) is set to On in the full menu.
2)
3)
Since Color Temp is clipped at 2000K and 15000K during R/B Gain operation, it may not be possible to display the correct Color Temp value for the R/B Gain value.
4)
Since Color Temp Balance is clipped at ±99, it may not be possible to display the correct Color Temp Balance value for the R/B Gain value.
5)
Configurable only when Project > Basic Setting > Input Color Space (page 58) is set to Rec.2020/HLG_Rec.2100 in the menu.
The zoom and focus drive instructions from a remote control unit are disabled when an E mount lens is attached.