Sony VENICE MPC-3610 Operating Instructions Manual page 46

000 46
3. Camera Operations: Menu Operations
Audio category
Default values are shown underlined and in
Item Settings
Source Switch LINE / AES/EBU / MIC
CH-1 Audio Level Auto/Manual
–99 to ±0 to +99
CH-2 Audio Level Auto/Manual
±0
–99 to to +99
MIC Reference –60dB/–50dB/–40dB
Monitor CH When Monitor Output CH Pair
is set to CH-1/CH-2
CH-1/CH-2, CH-1, CH-2
When Monitor Output CH Pair
is set to CH-3/CH-4
CH-3/CH-4, CH-3, CH-4
Monitor Level 0 to 99
CH1 Level Meter –
CH2 Level Meter –
CH3 Level Meter –
CH4 Level Meter –
Audio Details
(ITEM key 6)
bold
text.
Description
Displays the position of the AUDIO IN switch
(page 9) that sets the CH1 and CH2 input
source.
The audio recording level is adjusted
automatically when set to Auto.
The audio recording level is adjusted manually
when set to Manual.
The audio recording level is adjusted
automatically when set to Auto.
The audio recording level is adjusted manually
when set to Manual.
Selects the reference input level of the
microphone.
Selects the audio channel that is output to the
headphones and speaker.
Adjusts the monitor audio level.
Displays the CH1 level meter.
Displays the CH2 level meter.
Displays the CH3 level meter.
Displays the CH4 level meter.
Displays the contents of the Audio menu
(page 67) in the full menu.
Checking the Status using the Info Category
You can check the status of media and the battery, and check the contents of warnings and errors that
are issued using the Info category. The contents of the display update in realtime as the status of the unit
changes.
The Info category consists of the following seven information pages. Turn the MENU dial to switch the
page.
No. Page Description
1 Camera Condition Displays warning messages and error messages. When there are
no messages, "All Systems are OK" is displayed at the top of the
display area.
2 Firmware Displays the serial number and firmware version of the unit, and
the serial number and firmware version of the AXS-R7 attached
to the unit.
3 License Displays the name and installation status/validity of option
software licenses. If an option is not added, "Not Installed" or
"Expired" is displayed for the installation status.
4 System Displays the following system information.
ˎ Date and time
ˎ Fan rotation speed
ˎ Sensor detection temperature
ˎ Hours meter
ˎ IP Address
[Notes]
ˎ If the sensor detection temperature reaches 65 °C (149 °F), a high
ˎ "0.0.0.0" is displayed if the IP address cannot be obtained.
5 Battery Displays the following battery information.
ˎ Detected battery name or type
ˎ Remaining capacity (%)
ˎ Estimated remaining time
ˎ Remaining capacity (Ah)
ˎ Voltage (V)
ˎ Number of times that the battery has been charged
ˎ Power source
ˎ Supplied power source voltage
6 Media Displays the remaining capacity, remaining recording time, and
lifespan data of SxS memory cards, AXS memory cards (when
AXS-R7 is attached), and SD cards.
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
temperature warning message is issued.
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ