Operations On The Home Screen Of The Mini Display - Sony VENICE MPC-3610 Operating Instructions Manual

000 76
3. Camera Operations

Operations on the Home Screen of the Mini Display

You can check the status of the unit and set basic
settings for the unit on the Home screen of the
mini display.
1
2
3
4
5
1.
FPS
Sets the shooting frame rate.
2.
Shutter
Displays and sets the shutter speed/shutter
angle of the electronic shutter.
3.
ND Filter
Displays and sets the density of the ND filter.
4.
Exposure Index/Gain
Displays and sets the exposure index (EI), or
displays the gain value (dB units) set by an
RM-B170 or other remote control unit.
[Note]
The gain value is displayed only when Technical
> System Configuration > RM/RCP Paint Control
(page 68) is set to On in the full menu.
5.
WB (White Balance)
Displays and sets the white balance.
Display and operation when RM/RCP Paint
Control is enabled
ˎ The gain value is displayed instead of the ˎ
Exposure Index when Technical > System
Configuration > RM/RCP Paint Control
(page 68) is set to On in the full menu. In this
mode, the EI value cannot be changed.
ˎ The following items cannot be operated ˎ
when an RM-B170 or other remote control
unit is connected and Technical > System
Configuration > RM/RCP Paint Control
(page 68) is set to On in the full menu. Set
these using the remote control unit (page 87).
ˎ Shutter ˎ
ˎ WB (White Balance) ˎ
Controls
HOME button (page 8)
Press to return to the Home screen. Unconfirmed
changes are canceled.
ITEM key 1 ( ) (page 8)
Press to select items on the Home screen.
ITEM key 2 ( ) (page 8)
Press to apply the selected item.
ITEM key 3 ( ) (page 8)
Press to select items on the Home screen.
Basic Operation
1
Press ITEM key 1, 2, or 3.
The cursor appears.
2
Select the item to set using the button
(ITEM key 1) or button (ITEM key 3).
3
Press the button (ITEM key 2).
The setting value selection screen appears for
the selected item.
[Note]
The mark indicates the current setting.
4
Move the cursor to the item or setting value
using the button (ITEM key 1) or button
(ITEM key 3).
5
Press the button (ITEM key 2) to apply the
setting.
6
Press the HOME button to hide the cursor.