000 21
2. Preparation: Mounting a Lens and Adjusting the Flange Focal Length
Attaching an E Mount Lens
1
Remove the PL lens adaptor (page 20).
2
Push the lock switch up, and turn the mount
lever clockwise to release the lock.
Mount lever
Lock switch
3
Align the mounting marks (white) on the unit
and lens mount, and then push the lens into
the mount.
4
Secure the lens by turning the mount lever
counterclockwise while holding the lens.
Mounting marks
(white)
[Note]
When an E mount lens is connected, operation using a 12-
pin lens connector is not guaranteed.
To remove the lens
1
Push the lock switch up, and turn the mount
lever clockwise to release the lock.
2
Pull the lens forward.
[Note]
If another lens will not be attached soon, carefully
align the concave part of the mount cover, then
secure the mount cover by turning the mount lever
counterclockwise.