Sony VENICE MPC-3610 Operating Instructions Manual page 45

000 45
3. Camera Operations: Menu Operations
Item Settings
Format Media AXS Slot A
(executed when
AXS Slot B
switching to another
SxS Slot A
screen)
SxS Slot B
SD Card
Media Details
(ITEM key 6)
Monitoring category
Default values are shown underlined and in
[Notes]
ˎ The unit supports independent configuration of Status Info and Frame Line for each system. The display information for the ˎ
A and B output images is configured using the Monitoring menu (page 63).
ˎ Info and Frame Line may not be displayed depending on the Output Format setting. In this case, "–" is displayed and the ˎ
setting cannot be changed.
Item Settings
VF Status Info Info
Frame Line Line A/Line
SDI 1/2 Output The available settings vary
Format according to the imager
mode, project frame rate, and
SxS recording format settings.
Status Info –
Frame Line Line A/Line
SDI 3/4 Output The available settings vary
Format depending on the SDI 1/2
[Note]
setting.
Depending on the
Status Info Info
Output Format setting
of SDI 1/2, the Output
Format, Info, Frame
Frame Line Line A/Line
Line settings of SDI
3/4 may be blank and
cannot be changed.
Description
Formats the AXS memory card in slot A.
Formats the AXS memory card in slot B.
Formats the SxS memory card in slot A.
Formats the SxS memory card in slot B.
Formats the SD card.
Displays the contents of the TC/Media
menu (page 61) in the full menu.
bold text.
Description
A/Info B/Off Selects the information to display
superimposed on the viewfinder image.
B/Off Selects the frame lines to display
superimposed on the viewfinder image.
Selects the SDI 1/2 output format.
Information display is not superimposed
on the SDI 1/2 output.
B/Off Selects the frame lines to display
superimposed on the SDI 1/2 output.
[Note]
Frame lines are only superimposed if the
output format is 4K/QFHD.
Selects the SDI 3/4 output format.
A/Info B/Off Selects the information to display
superimposed on the SDI 3/4 output.
B/Off Selects the frame lines to display
superimposed on the SDI 3/4 output.
Item
Monitor Output
Format
Status Info
Frame Line
HDMI Output
Format
Moni. Details
(ITEM key 6)
For details about formats available for selection, see "SDI OUT Connector Output Formats" (page 96).
1)
For details about formats available for selection, see "MONITOR OUT Connector/HDMI OUT Connector Output Formats"
2)
(page 100).
1)
1)
Settings Description
The available settings vary Selects the Monitor output format.
depending on the SDI 1/2
setting.
B/Off
Info A/Info Selects the information to display
superimposed on the Monitor output.
Line A/Line B/Off Selects the frame lines to display
superimposed on the Monitor output.
The available settings vary Selects the HDMI output format.
depending on the SDI 1/2
setting.
Displays the contents of the Monitoring
menu (page 63) in the full menu.
2)
2)