Operations On The Home Screen Of The Sub Display - Sony VENICE MPC-3610 Operating Instructions Manual

000 33
3. Camera Operations

Operations on the Home Screen of the Sub Display

Basic Operation
1
Press the HOME button.
The Home screen appears.
2
Select the item to set using the ITEM keys 1 to
6.
The setting value for items that can be
changed are displayed in orange.
The following diagram shows an example
when ITEM key 3 is pressed.
3
Move the cursor to the item or setting value to
select using the button (ITEM key 2),
button (ITEM key 5), or MENU dial.
4
Press the MENU dial or Set button (ITEM key 3)
to apply the setting.
Changing the brightness of the sub display
You can change the brightness of the sub display
using Technical > Control Display > Brightness
level (page 70) in the full menu.
On the Home screen, you can also press and hold
the BACK button and turn the MENU dial clockwise
to change the brightness of the sub display in the
sequence Minimum  Low  Mid  High with
the current setting as the base point.
You can also press and hold the BACK button and
turn the MENU dial counterclockwise to change
the brightness of the sub display in the sequence
High  Mid  Low  Minimum with the
current setting as the base point.
[Note]
The display brightness setting is common to both the sub
display and the mini display, and is reflected on both displays
simultaneously.
Display and operation when RM/RCP Paint
Control is enabled
ˎ When Technical > System Configuration > RM/ ˎ
RCP Paint Control (page 68) is set to On in
the full menu, the gain value set by an RM-B170
or other remote control unit is displayed in the
EI display area. In this mode, the EI display area
is grayed out, and the EI value and gain value
cannot be changed. However, the Base ISO
setting can be switched.
In this case too, the LUT display area is grayed
output and cannot be operated.
ˎ The following display areas are grayed out and ˎ
cannot be operated when an RM-B170 or other
remote control unit is connected and Technical
> System Configuration > RM/RCP Paint Control
(page 68) is set to On in the full menu. Set
these using the remote control unit (page 86).
ˎ Shutter display area ˎ
ˎ WB display area ˎ
Step Edit Operation
You can change the settings available for selection
when "Step Edit" is displayed for ITEM key 4 in step
2 in the basic operation. You can add and delete
settings on the settings edit screen.
1
On the settings selection screen, move the
cursor to the setting you want to change or
delete, and press the Step Edit button (ITEM
key 4).
The settings edit screen appears.
2
To delete a setting, press the Delete button (ITEM
key 4).
[Note]
The selected setting can be deleted if the "Delete"
character string is displayed in orange.
3
Use the button (ITEM key 2), button
(ITEM key 5), or MENU dial to change the
setting.
4
When finished, press the Add button (ITEM key
4).
The setting is added and the display returns to
the setting selection screen.
[Note]
A setting can be added if the "Add" character string is
displayed in orange.
When setting White Balance
On the White Balance settings edit screen, you
can press the Coarse/Fine button (ITEM key 1) to
change the 1-step increment variation to coarse
or fine. You can also press the Temp/Tint button
(ITEM key 3) to switch the value between color
temperature (Temp) and color tone (Tint).
FPS Operation
Press ITEM key 1 on the Home screen to display
the FPS operation screen. You can press the
Variable/Fixed button (ITEM key 4) to switch
between "Fixed" for constant speed shooting and
"Variable (Select FPS)" for variable speed shooting.
[Note]
Audio is not recorded in "Select FPS" mode.